Factory equipment · 12 test machines · 26 production machines · record dated 10 November 2026

lixisports-Pickleball paddle factory test and production equipment

We keep 38 machines at our paddle plant. Twelve measure the paddle and 26 build it. Each card below names the machine, gives its model and shows the photo we took of it, so a buyer can check the plant before placing a sample order.

What we can measure

Internal gaps, spin, rebound, roughness, gloss, swing weight and twist weight.

What we can build

Blanks from cut carbon sheet, printed faces, edge guards, handles and packed cartons.

What we can show

A nameplate, a photo and a written reading for each machine.

X-ray CT inspection machine in the test lab
In the test lab: the X-ray CT inspection machine
Multi-layer hot press on the pickleball paddle production line
On the line: one of the multi-layer hot presses
The record

What the list covers

The list comes from our own equipment record dated 10 November 2026. It covers 12 machines in the test lab and 26 on the production line. Each card gives the model, the count and one job the machine does.

GroupMachinesWhat the group does
Test lab12Measures the paddle before and after it is built, and records numbers we can send back with a sample.
Production line26Cuts the sheet, lays it up, presses it, cools it, finishes the face and packs the carton.

The machines sit in the plant described in the plant and the team behind these machines. Every photo below was taken there.

At a glance

Numbers on the record

Four numbers from the equipment record. Each one has a limit, and we name the limit below.

38machines on the 10 November 2026 record
85hot-press platens across 13 press sets
150K+paddle blanks a month from those platens
9UV printers for custom paddle graphics

The 150K figure counts blanks. We quote a lead time against your own spec, not against a machine number.

Test lab · 12 machines

Machines in the test lab

These 12 machines measure a paddle before and after it is built. We use them on samples, on returned paddles and on batches before a carton closes.

The numbers we write down feed the six bench readings we record on a locked sample.

X-ray CT Inspection machine in our pickleball paddle plant

X-ray CT Inspection machine

Model UNCT2200 · 1 unit

We look inside a finished paddle for holes, gaps and layers coming apart.

Pickleball Paddle Impact Fatigue Tester in our pickleball paddle plant

Pickleball Paddle Impact Fatigue Tester

Model TG-1250-COR · 1 unit

We fire balls at a paddle to see how long the build holds together.

Pickleball Paddle Acoustic Tester in our pickleball paddle plant

Pickleball Paddle Acoustic Tester

Model TG-1269 · 1 unit

We record the sound a paddle makes when a ball hits it.

Accelerated Fatigue Tester in our pickleball paddle plant

Accelerated Fatigue Tester

Model UPA-A PBCOR · 1 unit

We run a long fatigue test in a short time to find early failures.

Paddle Repeated-Hit Fatigue Tester in our pickleball paddle plant

Paddle Repeated-Hit Fatigue Tester

Model TG-1265-PC · 1 unit

We hit the same spot again and again and watch for a drop in the reading.

Pickleball Paddle COR Tester in our pickleball paddle plant

Pickleball Paddle COR Tester

Model TG-1250-PBCOR · 1 unit

We measure how much energy comes back off the face and how much spin it adds.

Universal Testing Machine in our pickleball paddle plant

Universal Testing Machine

Model AI-7000-SU1 · 1 unit

We pull, press and peel parts to see where a bond gives way.

KEYENCE 3D Profilometer in our pickleball paddle plant

KEYENCE 3D Profilometer

Model VR-6000 · 1 unit

We scan the face in 3D to map its shape and texture.

Surface Roughness Tester in our pickleball paddle plant

Surface Roughness Tester

Model SR160 (C07410) · 1 unit

We measure how rough the face is, one line at a time.

Gloss Meter machine in our pickleball paddle plant

Gloss Meter machine

Model ETB-0833 · 1 unit

We measure how much light the face reflects.

Swing Weight & Twist Weight Measuring Device in our pickleball paddle plant

Swing Weight & Twist Weight Measuring Device

Model SW1 (BRIFFIDI-3384) · 1 unit

We measure how heavy the paddle feels when you swing it and twist it.

Beach Tennis Racket/padel racket Impact Machine in our pickleball paddle plant

Beach Tennis Racket/padel racket Impact Machine

Model LZJ-YD 23 · 1 unit

We run the same impact test on beach tennis and padel rackets.

Production line · 26 machines

Machines on the line

The 26 production machines run in the order a paddle is made: cut the sheet, lay it up, press it, cool it, finish the face, then pack it. The groups below follow that order.

Cutting and lay-up

CNC Blade Cutting Machine in our pickleball paddle plant

CNC Blade Cutting Machine

Model A0L-1625S · 1 unit

We cut carbon sheet to the drawing, including shapes a hand knife cannot hold.

Guillotine Sheet Cutter in our pickleball paddle plant

Guillotine Sheet Cutter

Model QZK1860M15 · 1 unit

We clamp the cloth before cutting, so the edges stay straight.

Precision Four-Column Press in our pickleball paddle plant

Precision Four-Column Press

Model MY-603 · 2 units

We press several layers at once through a custom mold.

Dual-Axis Oscillating Knife Cutter in our pickleball paddle plant

Dual-Axis Oscillating Knife Cutter

Model 2516 dual-axis · 1 unit

We cut contours from a CAD file without making a new mold.

High-Pressure Waterjet Cutter in our pickleball paddle plant

High-Pressure Waterjet Cutter

Model FG1313 · 1 unit

We cut carbon plate with water and grit, so the plate stays cool.

Automatic Powder Scattering Machine in our pickleball paddle plant

Automatic Powder Scattering Machine

Model SF-1600 · 1 unit

We spread grit evenly over the face and collect what falls off.

Pressing and cooling

Automatic Lay-up Line in our pickleball paddle plant

Automatic Lay-up Line

Model PL-2500 · 1 unit

We lay carbon cloth flat on the line and keep it from stretching.

Vacuum Autoclave in our pickleball paddle plant

Vacuum Autoclave

Model R2024-159 · 2 units

We cure carbon parts under heat, pressure and vacuum.

Industrial Chiller in our pickleball paddle plant

Industrial Chiller

Model MG-40CF · 1 unit

We send cold water through the press plates to cool the mold fast.

Cooling Tower in our pickleball paddle plant

Cooling Tower

Model CT-50T · 1 unit

We take the heat out of the water that comes back from the chiller.

Multi-Layer Hot Press in our pickleball paddle plant

Multi-Layer Hot Press

Model HY-07C · 13 sets

We press the face, the core and the edge together into a paddle blank.

Multi-Layer Cold Press in our pickleball paddle plant

Multi-Layer Cold Press

Model HY-07L · 13 sets

We cool the same mold under pressure so the face does not warp.

Electric Hot Press in our pickleball paddle plant

Electric Hot Press

Model KSH-2RY-2007 · 1 unit

We use this press for samples and small runs of carbon plate.

Cold Storage Room in our pickleball paddle plant

Cold Storage Room

Model LK-120 · 2 roomss

We keep prepreg at -18 °C until the line needs it.

Surface, graphics and packing

Automatic Sandblasting Machine in our pickleball paddle plant

Automatic Sandblasting Machine

Model PS-1200 · 1 unit

We clean and roughen the face before paint or glue goes on.

Digital UV Printer in our pickleball paddle plant

Digital UV Printer

Model UVTYD x7; DW763 x2 · 9 units

We print custom graphics straight onto the paddle face.

Digital Punching Machine in our pickleball paddle plant

Digital Punching Machine

Model DKJ268 · 2 units

We punch the hole pattern a beach tennis order asks for.

Putty & Sanding Workbench in our pickleball paddle plant

Putty & Sanding Workbench

Model DWDL-BTQXT-676 · 8 units

We fill small marks and sand the surface smooth by hand.

Automatic Shrink-Film & Labeling Machine in our pickleball paddle plant

Automatic Shrink-Film & Labeling Machine

Model NMRV-TMJQZD-SDLC548 · 1 unit

We will wrap and label handles on this line. It is still being set up.

Automatic Edge Banding Machine in our pickleball paddle plant

Automatic Edge Banding Machine

Model Model 006 · 2 units

We glue the edge guard onto the paddle in one pass.

Engraving Machine in our pickleball paddle plant

Engraving Machine

Model H1380 · 1 unit

We cut patterns into the face for color separation.

Handle Grip Wrapping Machine in our pickleball paddle plant

Handle Grip Wrapping Machine

Model P01-100-900 · 6 units

We wrap grip tape onto handles at an even tension.

PU Injection Machine in our pickleball paddle plant

PU Injection Machine

Model PU-DG1789 · 1 set

We mold PU handles onto the paddle shaft.

Automatic Film Wrapping Machine in our pickleball paddle plant

Automatic Film Wrapping Machine

Model BSP4525 · 1 set

We seal the outer carton in film before it leaves.

Spray Booth in our pickleball paddle plant

Spray Booth

Model PQF-8500 · 4 sets

We spray paint paddles and parts in a closed booth.

Automatic Spraying Machine in our pickleball paddle plant

Automatic Spraying Machine

Model MHQZD7886 · 1 set

We spray large orders on a machine so the color stays even.

Output

Output and its limits

The presses set the ceiling for how many blanks we can make. The rest of the line sets how many finished paddles leave the plant.

The 13 multi-layer hot presses hold 85 platens between them. Our equipment record puts their capacity at 150K+ paddle blanks a month. The 13 cold presses cool the same molds under pressure, so the face keeps its shape as the resin sets. Two vacuum autoclaves cure carbon parts at up to 26 m³, and an industrial chiller sends 19 m³ of cold water an hour through the press plates.

Nine UV printers put custom graphics on 150K+ faces a month. Two cold rooms hold prepreg at -18 °C over about 120 m², so the material stays inside its shelf life before it reaches the press. These are machine capacities from the record. A finished paddle still needs an edge guard, a handle, printing, inspection and packing, and a new core needs a new mold before the press can run.

For buyers

What buyers can ask

A machine list is useful only if it leads to a record you can read. The table pairs a check with the machine that runs it and the file we can send back.

What you want to checkWhich machine runs itWhat we send you
Holes, gaps or layers coming apart inside the paddleX-ray CT inspection machine, UNCT2200CT slice images of the paddle
Rebound and spin off the faceCOR tester, TG-1250-PBCORThe two readings with the test date
Face roughness and glossRoughness tester, SR160, and gloss meter, ETB-0833One roughness number and one gloss number
How heavy the paddle feels in the handSwing weight device, SW1Swing weight and twist weight
How long the build holds up under impactImpact fatigue tester, TG-1250-CORThe hit count and the reading before and after
Whether one batch matches the last oneThe press line and the test lab togetherA batch report with the measured numbers

Each carton also passes the eleven checks written into a batch report before it closes. We build thermoformed paddles on these presses, and a thermoformed paddle manufacturer that runs its own test lab lists the builds we hold as standard.

Limits of the list

Where we stop

Five limits on what a machine list can prove.

Read these before you quote a number from the record

  • A machine list is not an approval. The brand files its own model under its own name through the approval process USA Pickleball runs.
  • 150K+ is platen capacity for blanks. It is not a count of finished paddles and it is not a lead time.
  • One machine, the automatic shrink-film and labeling unit, is still being set up. It does not count in current output.
  • Our readings come from our own bench. We do not call them a third-party lab report. Name the lab and we will send samples there.
  • Models and counts come from the equipment record dated 10 November 2026. A machine swap changes the list, and we update the file when it happens.
FAQ

What buyers ask here

How many machines are on the list?

38 in total: 12 test machines and 26 production machines. The counts come from our equipment record dated 10 November 2026.

Can I see the machines on a live video tour?

Yes. We can walk the line on a video call and show the machine nameplates. Ask for a slot and we will send a time.

Do you send test readings with a sample?

Yes. We send the readings we measure on our own bench, including swing weight, surface roughness and gloss. Approval still belongs to the brand that files the model.

Does a machine list prove approval for sanctioned play?

No. The machines let us build and measure to published limits. The brand submits its own model under its own name.

What if one of the test machines is down?

We tell you before the sample run starts. We do not send a reading from a different bench without saying which machine measured it.

Which machines are still being set up?

One: the automatic shrink-film and labeling machine. It is under commissioning, so we do not count it in current output.

Can you test a paddle I send you?

Yes. Send the paddle and the numbers you want checked. We will say which of our machines can measure them before we run anything.

What is the minimum order?

200 units per spec, per design. Samples run ahead of any production order.

Next step

Send your sample brief

Tell us the build you want and the readings you need. We will say which machines can measure them and send back a sample count, a lead time and a quote.