Six specs · what moves together
Pickleball paddle comparison for OEM and bulk orders
Two cores, 16 mm and 20 mm, can both weigh 225 g. To get there, density has to drop from 80 to 64 g/L. Every spec below is tied to another one like that, so changing one moves the price. MOQ is 200 pcs per build, and samples take 10 to 15 days.
First, the basics
How the six specs connect
Most comparisons put two paddles side by side and ask which one is better. At the same weight, that question has no answer, because both builds reached 225 g in different ways.
Say you want a 20 mm core instead of 16 mm. The edge guard cannot stay the same, because it wraps the core plus two face sheets, and 16.4 mm becomes 20.4 mm. Density cannot stay at 80 g/L either, because a thicker core at the same density lands 24 g heavier on the scale. You changed one number, and three things moved with it.
The useful question is what else moves when you raise one of them. You pay that cost on the sample first, and again on the bulk order.
One weight, three densities
All three ship at 225 g with a 96 g core. A thicker core has to be lighter per litre.
One 24.00 in cap, three splits
Length plus width is the limit. Every shape comes within 0.10 in of it.
The table
Spec matrix
Each row is one line on an RFQ. Column three is what you take on when you change it. Column four is what stays open.
| Spec | Range we run | What moves with it | What stays open |
|---|---|---|---|
| Core thickness | 13 / 14 / 16 / 20 mm | Density, guard height, mold count, stiffness from 1.00 to 2.00. A 20 mm guard is a new mold, about 10 days. | Face sheet, artwork, grip |
| Core density | PP 60 to 90 g/L EPP 60 / 80 / 100 g/L | The weight the scale reads at a given thickness. EPP under 40 g/L takes a permanent set, so that floor is a material limit. | Shape, units per case |
| Face width | 7.52 / 7.68 / 8.00 in | Twist resistance, by the square of half-width. 7.52 to 8.00 in is 13.2% more resistance off centre. | Core thickness |
| Length | 16.00 / 16.30 / 16.38 in | The 24.00 in cap and the swing weight. A 15.0 in training body holds 32.4 kg·cm² where the 16.38 in game body holds 44.6 at the same 218 g. | Face sheet |
| Face sheet | Fiberglass, graphite, 3K, 12K, 18K, T700 | Grit, print, cure cycle and price level. Graphite is its own material at 1.72 g/cm³, between carbon at 1.55 and glass at 1.90. | Core density |
| Balance point | 238 / 244 / 248 mm | Swing weight at a fixed 225 g. An 8 mm shift on a 216 g body takes the reading from 44.2 to 49.2 kg·cm², or 11.2%. | Total mass |
All nine faces and cores are compared on the page that puts the nine side by side.
Two rows that disagree show up in the sample, which is the most expensive place to find them. A 20 mm core at 80 g/L is one of those pairs.
Line-up
Three build levels
Each column is a complete build we quote. The cells inside a column fit together, so moving one cell breaks that level.
| Item | Entry line | Main line | Flagship line |
|---|---|---|---|
| Core | PP honeycomb, 16 mm | PP honeycomb or EPP, 16 mm | EPP with an EVA ring, 14 mm |
| Density | 80 g/L | 80 g/L | 90 g/L |
| Face | Fiberglass, UV print | 3K or 12K carbon | 12K or 18K carbon, raw finish |
| Weight | 225 g ±5 g | 225 g ±5 g | 225 g ±2 g |
| Balance / swing weight | 244 mm / 45.6 kg·cm² | 244 mm / 45.6 kg·cm² | 244 to 248 mm / 45.6 to 49.2 kg·cm² |
| Grip | 5.0 in, 105 mm | 5.5 in, 105 mm | 5.71 in, 108 mm |
| Packaging | 50 pcs per case, 12.5 kg | Two-paddle box, 20 pcs per case | Rigid box, 24 pcs per case |
| Price level | Lowest | Middle | Highest, a wide margin |
Grip length and grip size are two different specs. The same 16 × 8 in body can reach you with a 5.25 or a 5.5 in handle, so ask for both by name.
USAP and UPA-A
Two limits you cannot trade
One rule caps the shape, the other caps the face. Neither is a price question.
Total length must stay at or under 17.00 in, and length plus width at or under 24.00 in. There is no width limit and no thickness limit, so a wider face is paid for in length. A 0.05 in change in width can push a widebody build over the line, and that is a compliance question rather than a feel question.
On the face, USAP moved to a two-camera spin reading on 1 October 2026 and caps it at 2,100 RPM on a new face. UPA-A reads the same cap after break-in, so one face can pass one test and fail the other. PBCoR moved from 0.44 to 0.43 on 1 November 2025, and we run both checks before a sample ships.
| Shape | Length + width | Room left |
|---|---|---|
| Elongated 16.38 × 7.52 in | 23.90 in | 0.10 in |
| Widebody 16.00 × 8.00 in | 24.00 in | 0.00 in |
| Hybrid 16.30 × 7.68 in | 23.98 in | 0.02 in |
Where the 24.00 in goes on each shape is drawn at one scale on the page that spends the same cap three ways. All three use almost the same amount of that cap, and they differ only in where the split lands. That is why one feels long and another feels stable.
Typical briefs
Start from your case
Buyers rarely arrive with a thickness in mind. They arrive with a retail band, a channel or an approval deadline, and that one fact locks half the table.
My retail price lands in the lowest band
Locked: fiberglass face, UV print, 16 mm PP core at 80 g/L, 225 g ±5 g, 50 pcs per case. Artwork and box print stay open, because neither changes the parts. A carbon face moves the build up one level, since the sheet alone is priced as a different material.
My channel is clubs, schools or rental fleets
Locked: 13 mm core at 195 to 218 g, shipped in pairs. A fleet buys in twos, and a mixed pair comes back. Skip the gift box here, because a 20 pcs case pays more freight per paddle than 50 loose paddles in one case.
My player is advanced and reads the spec
Locked: 14 mm core, T700 or 12K face, ±2 g, balance between 244 and 248 mm. At 14 mm the core runs about 11 g lighter than the 16 mm build. That 11 g is what buys the balance point without pushing past 225 g.
I need approval before launch
Locked: the shape has to stay inside 17.00 in and 24.00 in with room for measurement error, and the face has to clear 2,100 RPM on a new face. Your brand files the approval. We send bench readings with the sample instead of a claim.
My first order is 200 pcs in one color
Locked: one colorway per run. A changeover takes the same downtime on 200 paddles as on 2,000, so one color keeps your slot cheap. Unit price follows the total, and your place in the queue follows the color count.
Lead time
Time, tooling and freight
Two specs move the schedule. One moves how many paddles fit in a case. None of the three shows up in a spec table.
A new core thickness needs a new edge guard, and a new guard is a mold. A new shape adds a new pair of plates. The press has room, at 80,000 pcs a month thermoformed and 100,000 cold-pressed fiberglass. Packaging is easier to miss, because freight is paid per case rather than per paddle.
+10 days
For a new guard mold, plus sample lead time.
30 days
For 2,000 pcs once you approve the sample.
50 / 20 / 24
Paddles per case: loose, two-paddle box, rigid box.
2.5×
More freight per paddle on a 20 pcs case than on 50.
Weight and balance are pulled apart on the note on weight versus balance.
The fine print
What we do not claim
Five things this table cannot tell you, said before you build a purchase order on it.
- These are our line's numbers, not an industry standard. A different press, resin lot or core supplier lands somewhere else, so the table has to be rebuilt.
- The thickness-to-density trade only holds inside one core material. Switch from PP honeycomb to EPP and the density range moves with it.
- The 11.2% swing weight figure comes from a 4 in grip point. A shorter handle or weight at the guard changes it.
- The 46.83 RPM wear figure was read on an unprinted face. Artwork covers part of that texture, so the same face will not hold the same reading.
- We cannot file an approval for you. Certification is submitted by the brand for each model, and a good bench reading is not an approved paddle.
After the table
Buyer questions
Seven questions buyers ask after they have seen the table.
Is a 20 mm core heavier than a 16 mm core?
Not at the same finished weight. At 80 g/L the core carries about 25% more volume and lands 24 g heavier. Drop density to 64 g/L and it returns to 96 g, so both builds ship at 225 g.
Can I compare two paddles by weight alone?
No. Weight is the number we fix first, not the number that describes the paddle. Two 225 g paddles can sit 16 g/L apart in density and 0.70 apart in stiffness, which is why they feel different in your hand.
Does a wider face always twist less?
Twist resistance grows with the square of half-width. Moving from 7.52 to 8.00 in takes the face from 56.55 to 64.00 sq in, or 13.2% more, and the core has to give up thickness or density to stay under 24.00 in.
Is a coarser grit a free upgrade in spin?
No. An 80 mesh grain is 0.177 mm and a 100 mesh is 0.149 mm, so the coarser face has fewer contact points: 37 against 52 in our count. Over 100 hits at 90 km/h ours drops 46.83 RPM.
Why would a 20 mm build need a new edge guard?
The guard wraps the core plus two 0.20 mm face sheets, so it runs 14.4 mm on a 14 mm core and 20.4 mm on 20 mm. That is a new mold, about 10 days.
Can one mold serve more than one shape?
No. Each shape is cut into its own pair of plates. Sharing a core between two shapes saves the core, not the mold.
Can you certify the paddle for me?
No. Your brand files the approval for each model. USAP reads the 2,100 RPM cap on a new face and UPA-A reads it after break-in. We send bench readings with the sample.
Get a quote on your build
Thickness, density, face and target weight are enough to quote. If two of those disagree, we flag it before the sample stage.