Case file · padel rackets · sample order

A sample order that started with one spec sheet

A UK padel brand sent a full spec and asked about prices, the minimum, samples and the mold. The thread covers the samples, a custom throat, and a payment that moved to PayPal, and it ends with three samples in production.

What the buyer asked

Unit prices at 300, 500 and 1,000, the minimum, three samples to the UK, and a photo of the round mold.

What we answered

Four round molds, a proforma the same day, and a custom throat that needs a new mold.

Where it landed

Three samples paid and in production, with the throat still open.

12K carbon fiber weave, the face material on the samples in this file
The inquiry

What arrived with the inquiry

The first email arrived on 2 Nov with a full spec: a round mold, 355 g plus or minus 5 g, 38 mm, a 12K or 18K carbon face, an EVA core, and gloss in blue, white and exposed carbon. Four points came with it. The table carries them.

The buyer askedWhat it decided
What is the unit price at 300, 500 and 1,000 pieces?The volume tiers the quote runs on, and what the graphics add to them.
What is your minimum order quantity?How many designs the first production run has to carry.
Can you send 2–3 samples to the UK this month, and what do they cost?The sample count, the shipping route, and the dispatch date.
Can you send a photo of the round mold you would use?Which mold the samples run on, and whether the throat is stock.
The thread

What we answered

The whole thread ran in English. The name, the brand, the mailbox, the phone number and the delivery address are masked. Prices stay in the thread; this file shows the build.

Terms and molds 2 Nov
From lixifirm@outlook.com · To ██████ by email
"We have four round molds for option. The minimum for production is 200 units per spec, per design. For the core we recommend EVA 15. The face runs 12K or 18K carbon exposed, with the graphics applied by decal. We quote EXW plus international shipping, and the final cost moves with the graphic design."
Proforma and the throat 3 Nov
From lixifirm@outlook.com · To ██████ by email
"The proforma went out with the company and bank details. On the throat: any change to the racket shape means a new mold, and a new mold is the biggest single cost in the file. The lead time runs 10–15 days after the mold files are confirmed. The first model on the list had sold out, so we sent close-up photos of the other three throats."
The buyer 3 Nov
From ██████ · To lixifirm@outlook.com
"Our bank won't allow transfers to China, so could we pay by PayPal or a card payment link instead? Happy to cover any PayPal fee."
Artwork and the setup fee 4 Nov
From lixifirm@outlook.com · To ██████ by email
"Payment received, thank you. Please check the template for the artwork and the hole patterns; 52 and 68 holes are available. The final artwork must arrive as an editable AI or PDF file. The graphics run by decal, and each design carries a one-time setup fee that moves with the design. For the samples, please confirm the finish: glossy, sandy, and 12K carbon exposed?"
The buyer 4 Nov
From ██████ · To lixifirm@outlook.com
"Yes, please go ahead with glossy, sandy and 12K exposed carbon for the samples. Sample A: EVA 13, 52 holes. Sample B: EVA 13, 68 holes. Sample C: EVA 15, 52 holes. All at 355 g plus or minus 5 g, 38 mm, head-light balance. Please label each racket A, B and C, a sticker on the handle is fine, so we can tell them apart when testing."
The spec

What the samples carry

3samples: A, B and C, all on the same mold
2core hardnesses: EVA 13 soft and EVA 15
2hole patterns: 52 and 68
1spec sheet: 355 g plus or minus 5 g, 38 mm, head-light
SampleCoreHoles
AEVA 13 (soft)52
BEVA 13 (soft)68
CEVA 1552

The buyer split the three samples so each pair moves one variable: A against B changes only the holes, and B against C changes only the core. A difference on court then points at one change instead of two. The face is 12K exposed carbon with a sandy texture under gloss, and the graphics stay standard until the artwork is in.

The throat stays stock for the samples. A custom throat is a separate file: a new mold, a cost that moves with the design, and a clock that starts when the files land. The buyer named early December to confirm the throat, with a spring 2027 launch behind it.

The result

Where the thread landed

Where it stands

Three samples paid and in production

One spec sheet, one thread, and three samples in production. The rackets carry the spec the buyer wrote: 12K exposed carbon with a sandy texture under gloss, EVA 13 in two of them and EVA 15 in the third. A, B and C sit on a handle sticker so the buyer can tell them apart when testing. The setup fee went back the same day: a one-time charge per design, and a simple design costs less than a complicated one. The samples run through the eleven-point check that runs before a carton closes the same way a bulk order does. This file ends at the sample order, and a bulk order would be a different file.

Where we stop

Five limits on this file

Read these before you quote from this file

  • One sample order is not a bulk order. This file has three samples on it and no production purchase order.
  • The custom throat is not ordered. The buyer named early December to confirm the design, and the mold clock starts when the files land.
  • The final artwork is not in this file. The samples run standard graphics, the template went out, and an editable AI or PDF file is required before production.
  • No price is in this file. The sample quote, the mold, the setup fee and the freight stay in the thread, and we do not publish them.
  • How a bulk order gets paid is not settled. PayPal worked for the samples after the bank refused the transfer; a production order is a bigger number and a different route.
Before you send files

What buyers ask here

Can you build a custom throat on an existing mold?

Any change to the shape means a new mold. The lead time runs 10–15 days after the mold files are confirmed, and the cost moves with the design.

Can we get samples before a bulk order?

Yes. The samples in this file ran ahead of any production order and shipped duty paid to the UK. The quote for them stays in the thread.

What artwork format do you need?

An editable AI or PDF file, on the template we send. The graphics run by decal, and each design carries a one-time setup fee.

What is the minimum order?

200 units per spec, per design.

Can the samples use different hole patterns and core hardness?

Yes. The samples in this file were split so each pair moves one variable: the hole pattern at the same core, or the core at the same hole pattern.

The template carries the artwork and the hole patterns. The core hardness sits on the spec sheet.

Start a file

Send the racket you want matched

We are a paddle manufacturer for start-up brands, and the same terms run on padel rackets and beach tennis rackets. The custom paddle and padel racket program sets out the molds, the artwork files and the sample terms. Send the spec sheet you already have, or the throat you want matched, and we will tell you which mold it runs on and when the samples can ship.