Case file · sample order · USA

Twelve samples in 43 days, from two approved paddles

A brand that had not launched sent two approved paddles and asked for a hybrid and a coarser grip. Twelve samples shipped in 43 days.

The brief

Rebuild two approved builds, add a hybrid, coarsen the face.

The order

12 units: 8 printed P31, 4 blank for testing.

The clock

43 days from the first form to the air waybill.

Testing bench at a pickleball paddle factory where sample units are measured before shipment
The intake

What arrived with the brief

The first message arrived on 20 September 2026 through the contact form. The sender ran a brand that was not live yet, owned two thermoformed carbon paddles already approved by USA Pickleball, and wanted a third shape. He did not want a copy. He wanted a factory that could rebuild the spec and then change it.

He already hadThe brief asked for
Two approved thermoformed buildsThe same builds pressed to the same numbers
Carbon face, four layers per sideFour layers kept, grit set coarser
EPP core with an EVA ringEPP and EVA kept, one hybrid outline added
What we did

What we did, and when

22 Sep · Receiving address in Shenzhen

We sent the Bao'an address that week and he shipped two approved units. A paddle in hand tells you more than a photo.

22 Sep · Grit set at 100 mesh

Ceramic goes into the resin before it cures, so it sits inside the face rather than on the surface. We offered 80 and 100 mesh.

24 Sep · A shape from the mold list

He sent a photo of a hybrid he liked. We matched it to mold P31 instead of cutting a new one, which saved tooling and two weeks.

8 to 10 Oct · Three mockup rounds

He supplied print-ready artwork. We changed the snake colour, moved the rule, and refused one request that would have hidden the USAP mark.

10 Oct to 2 Nov · Press, print, ship

He fixed the order at 12 units on 28 September and paid on 2 October. The line released after the holiday, the edgeless pair needed a putty fill, and the finished eight went out first.

The thread

The thread, in his words

Copied from the thread, spelling included. Names, the brand, the mailbox, the phone and the address are masked.

New entry: contact form 20 Sep 2026, 18:59
From ██████ <██████████@██████.com> · To lixifirm@outlook.com
"Started a pickleball business. ██████ Pickleball LLC. The company is not live but will be soon. Have two thermoformed carbon paddles with EPP and EVA foam that have been approved by the USAP."
Re: custom pickleball paddle 29 Sep 2026, 17:44
From ██████ <██████████@██████.com> · To lixifirm@outlook.com
"The eight printed paddles will be the P31 model and I will supply the artwork? All paddles will have the ceramic sand infused surface? Would like an aggressive course allowed by the USAP new standard of 2100 RPM."
Re: custom pickleball paddle 30 Oct 2026, 06:48
From ██████ <██████████@██████.com> · To lixifirm@outlook.com
"These also have the infusion grit? Very important that we have deep grit that last. Can you let me know that these have that grit."
The bench

What the face measured

100Impacts at 90 km/h on one face
−46.83RPM lost, first reading to last
100Mesh grit, about 150 µm per particle
12Units in the order, 4 left blank

The spin reading fell from 1,668.83 RPM to 1,621.99 RPM, both measured on the unprinted face. A sprayed coating on the same sheet loses about 100 RPM, because a particle held under the surface keeps its edge after the layer above it wears away.

The 2,100 RPM cap is a ceiling, not a target. We test to the published figures and hand the readings over, and the cap is set by USA Pickleball's equipment program, not by us.

Pickleball paddle face after wear testing, showing ceramic grit held inside the cured resin layer
The result

What the buyer has now

Where it stands

Twelve units out, no production order yet

Eight printed P31 units, four blank units, and two edgeless shapes a week behind, all carrying the infused face. All twelve passed the eleven checkpoints we run before a carton closes, and the weight log went with them. He is testing with tour players before he decides on a run, and we will not count this as a bulk order yet.

Where we stop

Four limits on this file

Read these before you treat the file as a win

  • Twelve samples and a promise to test is not a bulk order. This account has one sample invoice and no production purchase order.
  • The brand has not agreed to be named here. No logo, no founder name, no signature file, and no claim of partnership or endorsement.
  • His edge guard was a custom Pantone blue. Samples went out with black guards, and bulk matches the Pantone after the colour is approved.
  • We have no wear test of 80 mesh against 100 mesh. We recommended 100 because a finer particle sits deeper in the resin. That is our reasoning, not a measurement.
Before you send files

What buyers ask here

Can you rebuild a paddle that already passed USAP testing?

Yes. Send the paddle or the full spec and we press it to the same numbers. The approval stays with your model and does not carry over.

How long does a thermoformed sample take?

Twelve to fifteen working days for press and print, plus two to three for the readings. Edgeless builds add a week for putty.

How coarse can the infused grit be?

We run 80 mesh, about 180 µm, and 100 mesh, about 150 µm. We recommend 100, because the finer particle sits deeper in the resin.

Do you make covers and retail packaging?

Yes. Covers, hanger cards and boxes are quoted as parts, and printed hangers sit above 1,000 pieces because the printer sets that floor.

Covers, hanger cards and boxes are quoted as parts alongside the paddle. On how the custom paddle program handles parts, the minimum for printed hangers is set by the printer, not by the paddle run.

Start a file

Send the paddle you approved

We are a thermoformed pickleball paddle manufacturer, and a sample order is how most accounts begin. Send the build that passed testing and the shape you want next, and we will tell you which mold code it lands on.