We are a 14, 16 and 20 mm pickleball paddle manufacturer for OEM, wholesale and bulk orders
One outline at 16.38 x 7.52 in, one build at 225 g, three core depths. Cell density changes with the core, so the build weight stays put. MOQ 200 pcs, samples in 10 to 15 days.
The core
- Depth: 14, 16, 20 mm
- Density: 90, 80, 64 g/L
- Cell: 8 mm on all three
The build
- Weight: 225 ±5 g
- Balance: 244 mm
- Swing weight: 45.6
Where it stops
- No ±1 g band
- 20 mm needs its guard mold
- The USAP file is yours
Full specification
Three columns, one outline. Every part below the core is the same part number, so a line-up can carry all three depths without a second face or a second handle.
| Item | 14 mm | 16 mm | 20 mm |
|---|---|---|---|
| Core depth | 14 mm | 16 mm | 20 mm |
| Cell density | 90 g/L | 80 g/L | 64 g/L |
| Core mass | 94 g | 96 g | 96 g |
| Cell size | 8 mm | 8 mm | 8 mm |
| Cell wall | 30 to 90 µm | 30 to 90 µm | 30 to 90 µm |
| Face | 0.20 mm T700 | 0.20 mm T700 | 0.20 mm T700 |
| Guard height | 14.4 mm | 16.4 mm | 20.4 mm |
| Build weight | 225 ±5 g | 225 ±5 g | 225 ±5 g |
| Balance point | 244 mm | 244 mm | 244 mm |
| Swing weight | 45.6 kg·cm² | 45.6 kg·cm² | 45.6 kg·cm² |
| Outline | 16.38 x 7.52 in | 16.38 x 7.52 in | 16.38 x 7.52 in |
| USAP sum | 23.90 of 24.00 in | 23.90 of 24.00 in | 23.90 of 24.00 in |
| MOQ | 200 pcs | 200 pcs | 200 pcs |
Swing weight is measured 4 in up the butt. USAP sets no thickness limit, and the two caps an outline has to clear are the same for all three columns.
Same weight, three cores
A 20 mm core holds 25% more volume than a 16 mm core. At 80 g/L it would add 24 g, and the 20 mm model would leave the weight band the buyer already approved.
We change the cell instead of the weight. At 64 g/L the 20 mm core lands at 96 g, and the 14 mm core runs denser at 90 g/L to reach the same figure. The three depths ship at one weight, one balance and one swing weight.
The cell is the variable, and why cell size sets the density covers that geometry.
Stiffer panel, softer ball
Panel stiffness follows the square of the core depth. Going from 14 to 20 mm doubles the index, so the head bends half as far under the same load.
| Core | Depth ratio | Stiffness index |
|---|---|---|
| 14 mm | 1.00 | 1.00 |
| 16 mm | 1.14 | 1.30 |
| 20 mm | 1.43 | 2.00 |
The cell compresses further at the same time, because a deeper core has more of it to give. A 20 mm paddle therefore feels firm at the edge and soft under the ball, which is the opposite of what most buyers expect from the word thick.
Where each depth sells
Most lines need one depth. The table shows where each depth earns its place in a line, and where it comes back as a return.
| Your SKU | Core | What it buys | What it costs |
|---|---|---|---|
| Entry and school line | 14 mm | The lowest core mass at a given stiffness target | A firmer face than a beginner expects |
| Volume model | 16 mm | The depth most buyers already stock and compare against | Nothing, and it is the safest first order |
| Comfort or flagship | 20 mm | More dwell, less buzz through the hand | 4 mm of stack height and its own guard mold |
Before the quote: how 2 mm of core changes the build walks through the 14 and 16 mm pair.
Guard and tooling
Each depth carries its own edge guard, because the guard has to wrap the full stack. The three heights are 14.4, 16.4 and 20.4 mm.
The 14 and 16 mm guards already sit on the rack. A 20 mm guard is a new mold, which adds a tooling charge and 10 days before the first sample leaves.
Why 0.4 mm: the guard height is the core plus two 0.20 mm faces. It fits tight on purpose, because a loose guard rattles at the throat after a month.
Weight sorting
Sorting runs the same for all three depths: 1 g bins after assembly, pairs matched inside the carton, 225 g at plus or minus 5 g.
A tighter 2 g band is a separate line on the quote and does not change with the core. Depth is the last thing that moves a paddle's weight here, because the density is set to hold the mass before assembly starts.
What changes per order
Four things move without a new mold. The core, the face and the outline stay where they are.
| Item | Options | Note |
|---|---|---|
| Grip size | 4 in, 4 1/8 in, 4 1/4 in | 101, 105 and 108 mm. 4 1/2 in is not a size we mold. |
| Face print | UV, full bleed | Ink to the die line, 3.2 mm past the visible edge, 2 mm clear under the guard. |
| Guard color | Six standard colors | Custom shade from 1,000 pcs. |
| Artwork | Due at PO | Proof in three working days. |
Limits
Four requests come up often enough that they belong on the sheet rather than in a reply to one buyer.
Four claims we will not make
- We do not quote a plus or minus 1 g band on any depth.
- We will not call 20 mm a power upgrade. It buys dwell, not ball speed.
- A 20 mm first order pays the guard mold before the 200 pcs run.
- We do not file the USAP paperwork. The brand files the model.
FAQ
Questions that arrive with a drawing attached.
Does USAP set a core thickness limit?
No. USAP caps length at 17.00 in and the sum at 24.00. This outline reads 23.90.
Can one purchase order carry all three depths?
Yes, at 200 pcs per depth. Only the guard does not share.
Why does a 20 mm core weigh the same as a 16 mm?
Volume rises 25% and density falls 20%, so the core lands at 96 g either way.
Which depth should a first SKU use?
16 mm. It is the depth most buyers already stock.
Can you build 13 mm or 18 mm instead?
13 mm runs on the hybrid head. This head is quoted at 14, 16 and 20 mm.
How much softer does a 20 mm core play?
We quote no softness figure. The defensible number is the stiffness index, 2.00 against 1.00.
Start an order
A message with the depth, the grip size and the artwork deadline comes back as a quote within 24 hours. A sample pair goes out in 10 to 15 days.
Shenzhen Banky Technology Co., Ltd. · BSCI and ISO 9001 · MOQ 200 pcs