by Edward lee | Oct 14, 2026 | Blog
Grit wear lowers spin along a slope instead of switching it off. The slope is hard to measure. On our own test, the readings spread about five times wider than the loss we had to measure. The Short Answer: Spin Fades in a Curve, Not a Cliff Spin slides down a slope... by Edward lee | Oct 14, 2026 | Blog
A durable grit face is a paddle surface built to keep its grip through repeated play. Grit reaches that surface through the cloth weave itself, through a coating on top, or through grains cured into the resin. The material sets the route, and the resin, the cure and... by Edward lee | Oct 14, 2026 | Blog
A raw carbon face is a paddle surface where the cloth weave and the resin skin do the gripping. A coated face is a paddle surface that carries a separate layer of particles over the resin skin. Each one fails in its own shape. The better choice depends on the kind of... by Edward lee | Oct 13, 2026 | Blog
Two production batches can look the same and wear differently. An average hides that difference. Consistency means that the same test on the same face gives the same number twice. The Short Answer: Consistency Is a Repeat, Not an Average Grit retention is a ratio. It... by Edward lee | Oct 13, 2026 | Blog
A durable grit face is a paddle surface where the grit stays in place through repeated play. A factory can build one of these faces once. Far fewer factories can repeat the result across a full production run. Five kinds of evidence separate the two groups:...